first attempt turkish/tatar bow

This is where we discuss the craft of bow and arrow making.
Post Reply
lukasznawalny
Posts: 67
Joined: Mon Sep 14, 2009 9:22 am
Location: Poland

first attempt turkish/tatar bow

Post by lukasznawalny » Mon Mar 18, 2013 5:11 pm

my bows opened to final tillering. Im very afraid :shock:
http://www.fotosik.pl/u/robbin/zdjecie/1/album/1418913
lurz
Posts: 109
Joined: Sun Nov 22, 2009 6:26 pm
Location: Norway

Post by lurz » Mon Mar 18, 2013 7:03 pm

I know the feeling :shock: Good luck!
If it breaks you get to keep both parts.
User avatar
Uli
Posts: 600
Joined: Sat Aug 13, 2005 7:33 pm
Location: Saxony (home), Baltic (now)

Post by Uli » Wed Mar 20, 2013 9:31 am

niiice curves.
updates please
:D
jack farrell
Posts: 1864
Joined: Sun Mar 13, 2005 3:40 am
Location: Texas

Post by jack farrell » Wed Mar 20, 2013 1:02 pm

Handsome, very ambitious.
Fennec
Posts: 11
Joined: Tue Nov 20, 2012 3:10 pm
Location: Austria

Post by Fennec » Fri Mar 22, 2013 11:19 am

Take many, many pictures of the process, I'm very curious
lukasznawalny
Posts: 67
Joined: Mon Sep 14, 2009 9:22 am
Location: Poland

Post by lukasznawalny » Sat Mar 23, 2013 9:16 pm

Maybe I am weirdie but I dont like camera in my workshop, I always try to work on maximum focus and camera make me nervous. Good news so far, I tillered turkish bow and shoot few times. Bow is long - 134 cm ntn and overbulid , mass about 380 gram. I dont make big reflex before tillering, so directly after unstrung in sal section have string follow, few minuts and back to shape. This was very careful project, maybe it is nothing special but Im happy that my first turkish bow live :wink: . Now I go on holliday but 2-3 weeks I show you leather cover on bow. Sorry for my english :cry:
mikekeswick
Posts: 404
Joined: Tue May 05, 2009 11:01 am
Location: Durham,Engalnd

Post by mikekeswick » Thu Mar 28, 2013 6:50 pm

Your English is very good! Better than some English people :D
I'm also not keen on camera's in the workshop when contration is needed. Your bow looks very nice indeed. Well done on your first one.
lukasznawalny
Posts: 67
Joined: Mon Sep 14, 2009 9:22 am
Location: Poland

Post by lukasznawalny » Fri Mar 29, 2013 6:55 am

Hmm, I have doubt, I never learn english, know only from songs :). Looks that tatar bows survive too. I start to leather cover, put ultra thin 0,8 mm , every uneven on sinew are visible :( . I must work on it in future .
lukasznawalny
Posts: 67
Joined: Mon Sep 14, 2009 9:22 am
Location: Poland

Post by lukasznawalny » Tue Apr 16, 2013 1:15 pm

few pictures http://www.fotosik.pl/u/robinn/zdjecie/1/album/1435933
My first turkish bow :) On foto pull on 27 " , but easy to 30 inch, maybe more. Unstrung picture is after few days rest, directly after unstinging have little string folow. 7 inch BH. Maybe too much reflex in kasan eye but I dont change it , bow have no problems with twist limbs and have good energy storage. kasan 20 cm , sal 27 cm , tip 11 cm. 3 cm in middle of sal to 2,1 cm in kasan and handle .Next bows will be more agressive in sal area and shorter for sure :). Few days I show crimean tatar
Arry
Posts: 189
Joined: Mon Jun 11, 2012 8:43 pm
Location: Berlin

Post by Arry » Tue Apr 16, 2013 5:58 pm

Looking good!
Szybki jestes!
User avatar
Kviljo
Posts: 759
Joined: Wed Dec 26, 2007 8:35 pm
Location: Norway
Contact:

Post by Kviljo » Wed Apr 17, 2013 8:38 am

Wow! That's a very pretty bow!
lukasznawalny
Posts: 67
Joined: Mon Sep 14, 2009 9:22 am
Location: Poland

Post by lukasznawalny » Wed Apr 17, 2013 1:46 pm

crimean tatar ready. To strong for me I have problems with arm and cant pull full draw, but I think tiller is not bad. Over 60 lb at 28" , 144 ntn , 375 gram . BH 6 inch but i make little higher, bow have small problems with twist

http://www.fotosik.pl/u/robinn/zdjecie/1/album/1436481
lurz
Posts: 109
Joined: Sun Nov 22, 2009 6:26 pm
Location: Norway

Post by lurz » Thu Apr 18, 2013 8:30 am

Very nice!
If it breaks you get to keep both parts.
scemdonmez
Posts: 224
Joined: Fri Dec 16, 2005 8:58 pm
Location: izmir/TURKEY

Post by scemdonmez » Thu Apr 18, 2013 11:36 am

Congrats. looks very good.

Cem
alex27
Posts: 55
Joined: Thu Dec 23, 2010 7:06 pm
Location: Switzerland

Post by alex27 » Thu Apr 18, 2013 7:28 pm

nice work!
Post Reply