Crab bow

This is where we discuss the bows, arrows, quivers and other hardware used in Asian archery.
Post Reply
Alan Flashing
Posts: 181
Joined: Fri Jul 18, 2008 10:36 pm
Location: Oakland Oregon,USA
Contact:

Crab bow

Post by Alan Flashing » Mon May 31, 2010 6:35 pm

Another photo
You do not have the required permissions to view the files attached to this post.
MJuingong
Posts: 126
Joined: Wed Mar 16, 2005 4:54 am
Location: New York City, NY, U.S.A.

Post by MJuingong » Sat Jun 05, 2010 10:13 pm

Good to look at.

Dimensions, statistics, performance?
Alan Flashing
Posts: 181
Joined: Fri Jul 18, 2008 10:36 pm
Location: Oakland Oregon,USA
Contact:

Crab bow

Post by Alan Flashing » Sun Jun 06, 2010 1:09 am

This is a photograph before the decorative finish , the bow is made by Lukas Novotny of Saluki bows. I should have the finished bow this week . The length is 50".
75# at 29". Will post more photos and my thoughts after I receive it and get a chance to make some arrows to match it shoot it some .
MJuingong
Posts: 126
Joined: Wed Mar 16, 2005 4:54 am
Location: New York City, NY, U.S.A.

Post by MJuingong » Sun Jun 06, 2010 6:18 pm

Is that a fiberglass, or a horn-wood-sinew?
Alan Flashing
Posts: 181
Joined: Fri Jul 18, 2008 10:36 pm
Location: Oakland Oregon,USA
Contact:

Crab bow

Post by Alan Flashing » Sun Jun 06, 2010 6:25 pm

This is a horn/wood/sinew bow built for me by Lukas Novotny
MJuingong
Posts: 126
Joined: Wed Mar 16, 2005 4:54 am
Location: New York City, NY, U.S.A.

Post by MJuingong » Sun Jun 06, 2010 6:31 pm

Good!

Am I prying if I ask the price?
Peto
Posts: 40
Joined: Wed Feb 24, 2010 10:04 am
Location: Slovakia

Re: Crab bow

Post by Peto » Sun Jun 06, 2010 6:32 pm

Alan Flashing wrote:This is a horn/wood/sinew bow built for me by Lukas Novotny
... Im begrudge noiselessly... :D .
Peto
Alan Flashing
Posts: 181
Joined: Fri Jul 18, 2008 10:36 pm
Location: Oakland Oregon,USA
Contact:

Crab bow

Post by Alan Flashing » Sun Jun 06, 2010 6:35 pm

$2400 , could be much more depending on the laborious decoration done by hand. This photo is before the decoration , I should have the finished bow this week and will post photos. I chose a simple decoration to keep the price down a bit.
Alan Flashing
Posts: 181
Joined: Fri Jul 18, 2008 10:36 pm
Location: Oakland Oregon,USA
Contact:

Crab bow

Post by Alan Flashing » Sun Jun 06, 2010 6:36 pm

It has been almost 15 month wait for this bow , which is good as it gave me time to save up the $$ for it.
MJuingong
Posts: 126
Joined: Wed Mar 16, 2005 4:54 am
Location: New York City, NY, U.S.A.

Post by MJuingong » Wed Jun 09, 2010 1:37 am

Mr. Flashing:

Thank you for the information.
User avatar
jkekoni
Posts: 332
Joined: Mon Sep 03, 2007 6:14 am
Location: Espoo,Finland

Post by jkekoni » Wed Jun 09, 2010 8:23 am

Good looking bow.

The crab bows I have seen have had unbeliveably short bending limbs.

If this is based on different crab bow, or is this a better than the real thing - design. At least it does look more reasonable.
MJuingong
Posts: 126
Joined: Wed Mar 16, 2005 4:54 am
Location: New York City, NY, U.S.A.

Post by MJuingong » Sat Jun 12, 2010 4:58 pm

Is the shorter limb an optical effect produced by higher bracing (shorter string)?
Alan Flashing
Posts: 181
Joined: Fri Jul 18, 2008 10:36 pm
Location: Oakland Oregon,USA
Contact:

Crab bow

Post by Alan Flashing » Sat Jun 12, 2010 6:22 pm

I am not sure about the visual effect of one limb looking shorter than the other , it could be, I will not have the bow till this coming Thursday. It was just shipped out to me a few days ago and is in transit. It could be the temporary leather grip wrap that makes it appear this way.
Some of the photos that I have seen of original crab bows appear to be somewhat asymmetrical looking but not sure. Perchance someone with more knowledge in this will offer their observations.
mongolianarcher
Posts: 299
Joined: Thu Jan 22, 2009 12:51 am
Location: Florida

Post by mongolianarcher » Sat Jun 12, 2010 9:46 pm

It has that look because Lukas purposefully levels the limbs so that the top limb has more string height than the lower in order to balance the bow due to off center nocking.
xie xie, thank you
Lu Ka Jiang,
Lucas Cooper
Alan Flashing
Posts: 181
Joined: Fri Jul 18, 2008 10:36 pm
Location: Oakland Oregon,USA
Contact:

Crab bow

Post by Alan Flashing » Fri Jun 18, 2010 1:41 am

Just received the new bow today , just stunning.
You do not have the required permissions to view the files attached to this post.
Post Reply