Need info on Samwha SKB bow
-
Pawel Piotrowski
- Posts: 2
- Joined: Thu Sep 22, 2005 12:33 pm
- Location: Poland,Gdansk
Need info on Samwha SKB bow
Hello
I am looking for horse bow for my wife. I will also use this bow by myself ocasionally.
I have seen Samwha SKB bow in few e-shops here in Poland,looks nice and is inexpensive, but no one could tell what is its maximum draw length.
I use Grozer Old Scythian and my draw length is 30-31 inches,so I have to be sure what is max. for this SKB before I buy it.
By the way - what is Samwha homepage (I have found only manufacturer of capacitors and other electronic stuff named SAMWHA).
Thanks
Paweł
I am looking for horse bow for my wife. I will also use this bow by myself ocasionally.
I have seen Samwha SKB bow in few e-shops here in Poland,looks nice and is inexpensive, but no one could tell what is its maximum draw length.
I use Grozer Old Scythian and my draw length is 30-31 inches,so I have to be sure what is max. for this SKB before I buy it.
By the way - what is Samwha homepage (I have found only manufacturer of capacitors and other electronic stuff named SAMWHA).
Thanks
Paweł
- Gianrico
- Posts: 86
- Joined: Mon May 09, 2005 8:18 pm
- Location: Geneva, Switzerland
-
Pawel Piotrowski
- Posts: 2
- Joined: Thu Sep 22, 2005 12:33 pm
- Location: Poland,Gdansk
-
johnny.winter
- Posts: 20
- Joined: Wed Sep 21, 2005 12:15 pm
- Location: Bavaria, Germany
Gr?zer?
Why not go for another Gr?zer; good quality for a good prize and: a much better look, choice of different models and, of course, longer draw.
www.grozerarchery.com
www.grozerarchery.com
- Gianrico
- Posts: 86
- Joined: Mon May 09, 2005 8:18 pm
- Location: Geneva, Switzerland
Hello Pawel,
I made some researches, but unfortunately had no results. The only thing I finded is that it is better to write "Sam Wha", in two separate words.
For the problem of your bow (I have to buy one in Christmas period), I just wanted to remember that two "pillar-members" of Atarn can furnish excellent bows at a very good price: I mean the Hwarang bow from Thomas Duvernay and a good modern replica of chinese bow from Stephen. Personally I have a Hwarang (and planning to buy a chinese fiberglass for my wife): this korean bow is incredible, it is light and powerful at the same time.
Best regards
Gianrico
I made some researches, but unfortunately had no results. The only thing I finded is that it is better to write "Sam Wha", in two separate words.
For the problem of your bow (I have to buy one in Christmas period), I just wanted to remember that two "pillar-members" of Atarn can furnish excellent bows at a very good price: I mean the Hwarang bow from Thomas Duvernay and a good modern replica of chinese bow from Stephen. Personally I have a Hwarang (and planning to buy a chinese fiberglass for my wife): this korean bow is incredible, it is light and powerful at the same time.
Best regards
Gianrico
- Stephen Selby
- Posts: 1452
- Joined: Thu Mar 10, 2005 1:10 pm
- Location: Hong Kong
- Contact:
They can be drawn back to 35". But I do not recommend them because they are not very stable and the string nocks are poor. They unstring quite easily in warm weather.I have seen Samwha SKB bow in few e-shops here in Poland,looks nice and is inexpensive, but no one could tell what is its maximum draw length.
I would suggest a Grozer TRH Turkish design at around 35# - 40#.
- Bede
- Posts: 2360
- Joined: Mon Mar 14, 2005 11:57 am
- Location: Sydney, Australia
I have used some of these simple modern Korean bows (similar to the ones in the Quick's catalogue) over the last twenty years or so. Two things were always a problem: draw weight and draw length. Neither were predictable from the information on the bow.
Due to the design, the bows usually draw smoothly until the string is at ninety degrees to the tip. After that point the stacking increases dramatically and the bows become unstable as Stephen described. If your draw length is reached before that angle, you should be safe.
My recommendation is that you test draw the bow before purchase and have it tested for draw weight at your draw length. If the shop has a mirror, check the angles at the tips of the bow yourself. Otherwise, ask someone else to tell you. If the bow stacks at your drawlength, don't buy it. When you are shooting, you don't want anything distracting you and an uncomfortable bow is not much fun to practise with.
I own and use both Hwarang and Gr?zer bows and enjoy ther unique features, but I still shoot with some of my modern Korean bows too.
Due to the design, the bows usually draw smoothly until the string is at ninety degrees to the tip. After that point the stacking increases dramatically and the bows become unstable as Stephen described. If your draw length is reached before that angle, you should be safe.
My recommendation is that you test draw the bow before purchase and have it tested for draw weight at your draw length. If the shop has a mirror, check the angles at the tips of the bow yourself. Otherwise, ask someone else to tell you. If the bow stacks at your drawlength, don't buy it. When you are shooting, you don't want anything distracting you and an uncomfortable bow is not much fun to practise with.
I own and use both Hwarang and Gr?zer bows and enjoy ther unique features, but I still shoot with some of my modern Korean bows too.
Bede
-
Ian Robertson
- Posts: 7
- Joined: Thu Sep 29, 2005 3:50 pm
- Location: Calgary, Alberta
Could I trouble Bede and Stephen to expand a little on what they mean by 'unstable' in the context of these modern versions of Korean bows? Do they somehow manage to shed their string, and if so, how might this happen? Sounds pretty alarming.
Although I realize that they have almost nothing in common, structurally, with the beautiful kinds of bows that many of you make and shoot, I have been tempted for years to buy one of these inexpensive bows by Samick or Samwha--largely as a re-entry to thumb-release shooting. I shot a variety of thumb releases for several years back in the 70s, but (believe it or not) using the solid fiberglass recurves that were common back then. (I made the rings in shop class when my friends were busy making ash trays.)
Back to the SKB--perhaps I should really just keep saving and buy a bow from Grozer. Is it difficult and/or prohibitively expense to ship one of his bows to North America?
Thanks for any comments.
Ian
Although I realize that they have almost nothing in common, structurally, with the beautiful kinds of bows that many of you make and shoot, I have been tempted for years to buy one of these inexpensive bows by Samick or Samwha--largely as a re-entry to thumb-release shooting. I shot a variety of thumb releases for several years back in the 70s, but (believe it or not) using the solid fiberglass recurves that were common back then. (I made the rings in shop class when my friends were busy making ash trays.)
Back to the SKB--perhaps I should really just keep saving and buy a bow from Grozer. Is it difficult and/or prohibitively expense to ship one of his bows to North America?
Thanks for any comments.
Ian
Ian Robertson
- Thomas Duvernay
- Posts: 440
- Joined: Sat Mar 12, 2005 11:37 pm
- Location: hometown: Michigan, USA/current location: South Korea
- Contact:
- Bede
- Posts: 2360
- Joined: Mon Mar 14, 2005 11:57 am
- Location: Sydney, Australia
What I meant by instability were the two consequences of drawing a bow past the 90 degree string angle.
One is the the rapid stacking means that slight variations in draw length dramatically affect arrow flight and the second is that the string loops might pull off the limbs if the bow nocks allow it.
I am assuming the bow doesn't break. That happened to me a few weeks ago and I did not like the experience. There is a lot of force in an 80 pound bow at full draw. There I was not looking at instability, but structural failure.
One is the the rapid stacking means that slight variations in draw length dramatically affect arrow flight and the second is that the string loops might pull off the limbs if the bow nocks allow it.
I am assuming the bow doesn't break. That happened to me a few weeks ago and I did not like the experience. There is a lot of force in an 80 pound bow at full draw. There I was not looking at instability, but structural failure.
Bede
-
Adam Karpowicz
- Posts: 753
- Joined: Sun Mar 13, 2005 11:57 am
- Location: Canada
I bought one of the Samick SKB bows a while back. It of course came at 10lb too light, so I cut it down by a couple of inches and re-made the nocks. I still use it sometimes at my 28" draw. The bow was not the best quality, as expected. One of the nockc had the string groove off-center and required a bit of filing to fit, the laminations inside did not seem to have an even taper and there were a few sanding marks visible.
However, for a cheap bow it is worth buying. I understand Samick stands behind their products, so a bad bow can be returned. If your draw is no more than 29-30", the stacking will not be felt too much and the bow should be OK. On the other hand, the Samwha would be a bit risky to buy in my opinion.
Adam
However, for a cheap bow it is worth buying. I understand Samick stands behind their products, so a bad bow can be returned. If your draw is no more than 29-30", the stacking will not be felt too much and the bow should be OK. On the other hand, the Samwha would be a bit risky to buy in my opinion.
Adam
-
Vazul
- Posts: 4
- Joined: Sun Oct 02, 2005 6:25 pm
- Location: Asheville NC
- Contact:
Greetings. Just getting into asian archery and had pretty much settled on this bow as my starter bow, mostly due to the low cost.
I'm assuming this is the bow you guys are talking about:
http://www.3riversarchery.com/Product.a ... =0&i=2210X
It seems the reviews are mixed...but overall, is this an ok bow to start off with?
TIA
Matt
I'm assuming this is the bow you guys are talking about:
http://www.3riversarchery.com/Product.a ... =0&i=2210X
It seems the reviews are mixed...but overall, is this an ok bow to start off with?
TIA
Matt
- Bede
- Posts: 2360
- Joined: Mon Mar 14, 2005 11:57 am
- Location: Sydney, Australia
-
Vazul
- Posts: 4
- Joined: Sun Oct 02, 2005 6:25 pm
- Location: Asheville NC
- Contact:
-
Vazul
- Posts: 4
- Joined: Sun Oct 02, 2005 6:25 pm
- Location: Asheville NC
- Contact:
Finally recieved the SKB yesterday.
It was out of stock in the 40# for the longest time.
It's a nice looking little bow. Nothing fancy for sure.
I only got the 40# because I just had shoulder surgery in Nov and also figured it would be fine to learn thumb release on and then be able to pass on to someone else.
I didn't get any wooden arrows from 3Rivers. I picked up some carbon/aluminum arrows but they seem heavy for the bow.
Should I only shoot wooden arrows with this bow?
TIA
It was out of stock in the 40# for the longest time.
It's a nice looking little bow. Nothing fancy for sure.
I only got the 40# because I just had shoulder surgery in Nov and also figured it would be fine to learn thumb release on and then be able to pass on to someone else.
I didn't get any wooden arrows from 3Rivers. I picked up some carbon/aluminum arrows but they seem heavy for the bow.
Should I only shoot wooden arrows with this bow?
TIA
