Korean Hwarang bow performance.

This is where we discuss the bows, arrows, quivers and other hardware used in Asian archery.
Post Reply
Romain
Posts: 251
Joined: Sun Mar 13, 2005 1:28 am
Location: Beijing

made it

Post by Romain » Sun Mar 13, 2005 1:33 am

Hi from Beijing !

By the way Thomas, last week I made the power curve of the Hwarang you sold me, I try to post it below :
You do not have the required permissions to view the files attached to this post.
User avatar
Thomas Duvernay
Posts: 440
Joined: Sat Mar 12, 2005 11:37 pm
Location: hometown: Michigan, USA/current location: South Korea
Contact:

Post by Thomas Duvernay » Sun Mar 13, 2005 12:10 pm

That's neat Romain :D Thanks for posting it.


T
Romain
Posts: 251
Joined: Sun Mar 13, 2005 1:28 am
Location: Beijing

Hwarang

Post by Romain » Sun Mar 13, 2005 1:00 pm

Oops ! I forgot it was in French... I hope you can understand...

I'm sorry that I did not dare going further than 28 inches draw... I do draw longer when it is in my hand, but seeing the poor thing so distorted on my wall made me uneasy and I stopped at 28".... 28 counted from the inside of the handle, so a bit more than 29 in fact. See the picture below !

The reason that I tried it on the wall was that while shooting it the week before, an arrow nock broke at release and the bow made an ugly noise. I thought I would try it on a bench before shooting again.

So the conclusion is that the bow you sold me is very light, very small, very short, very fast and very strong as well, having resisted a dry fire at full thumb-draw !
You do not have the required permissions to view the files attached to this post.
User avatar
Samuraiwarrior
Posts: 147
Joined: Sat Mar 12, 2005 5:38 pm
Location: Arvada, Colorado, USA
Contact:

Post by Samuraiwarrior » Sun Mar 13, 2005 3:49 pm

Thanks for posting that Romain. It is very helpful. And I would say your bow is safe to draw 36".
User avatar
Bede
Posts: 2360
Joined: Mon Mar 14, 2005 11:57 am
Location: Sydney, Australia

Re.: your broken arrow

Post by Bede » Mon Mar 14, 2005 12:07 pm

Romain,
Did the nock break off on one side or did it split down the middle? Was it a self nock or a modern one?
Bede
Romain
Posts: 251
Joined: Sun Mar 13, 2005 1:28 am
Location: Beijing

Post by Romain » Mon Mar 14, 2005 12:20 pm

Bede,

It broke on one side, it was a modern translucent nock on a kassai wooden arrow. I must say that this arrow was far from new and the nock probably took a lot of beating in its nock life.

I heard that the translucent rigid nocks were more prone to breakage that the opaque softer ones.
User avatar
Bede
Posts: 2360
Joined: Mon Mar 14, 2005 11:57 am
Location: Sydney, Australia

Post by Bede » Tue Mar 15, 2005 7:41 am

Some of the old archery books say that the side of the nock breaks off because your index finger is pressing too hard against the side of the arrow.

I have broken plastic nocks by using too thick a string on too powerful a bow. They snapped straight down the middle. With Turkish-style nocks, I noticed that the large opening at the bottom of the nock meant that the cusps were not under pressure. You can see some pictures in the old discussion forum. I wonder if you could achieve the same thing with plastic nocks by removing a little material with sand paper.

Plastic nocks do degenerate with time. I do not know if it is due to Ultraviolet radiation, but they become brittle and powdery on the surface.
Bede
Adam Karpowicz
Posts: 753
Joined: Sun Mar 13, 2005 11:57 am
Location: Canada

Post by Adam Karpowicz » Wed Mar 16, 2005 11:02 am

The shape of the force-draw curve is very similar to the curves for real Korean hornbows.

Adam
Post Reply