Chinese antique arrowheads
-
Romain
- Posts: 251
- Joined: Sun Mar 13, 2005 1:28 am
- Location: Beijing
-
Romain
- Posts: 251
- Joined: Sun Mar 13, 2005 1:28 am
- Location: Beijing
-
Romain
- Posts: 251
- Joined: Sun Mar 13, 2005 1:28 am
- Location: Beijing
- Stephen Selby
- Posts: 1452
- Joined: Thu Mar 10, 2005 1:10 pm
- Location: Hong Kong
- Contact:
-
Romain
- Posts: 251
- Joined: Sun Mar 13, 2005 1:28 am
- Location: Beijing
-
Romain
- Posts: 251
- Joined: Sun Mar 13, 2005 1:28 am
- Location: Beijing
-
Romain
- Posts: 251
- Joined: Sun Mar 13, 2005 1:28 am
- Location: Beijing
-
Romain
- Posts: 251
- Joined: Sun Mar 13, 2005 1:28 am
- Location: Beijing
Then some more original ones :
The one on the left is made of bone, the whistle AND the head on top. I guess it would soon stop whistling after repetitive impacts...
On the right is a simple whistle, but made of terra cotta. It's a first for me.
The one on the left is made of bone, the whistle AND the head on top. I guess it would soon stop whistling after repetitive impacts...
On the right is a simple whistle, but made of terra cotta. It's a first for me.
You do not have the required permissions to view the files attached to this post.
-
Romain
- Posts: 251
- Joined: Sun Mar 13, 2005 1:28 am
- Location: Beijing
-
Romain
- Posts: 251
- Joined: Sun Mar 13, 2005 1:28 am
- Location: Beijing
- Bede
- Posts: 2360
- Joined: Mon Mar 14, 2005 11:57 am
- Location: Sydney, Australia
Romain,
When Scythian arrow heads were cast the mold made two three-bladed arrow heads and one two-bladed arrow head. A little barb on the socket was not uncommon. The arrow heads were sprued from the pointed end. After casting the sprue was cut away and the tip was shaped. I have seen pictures of Chinese arrow heads cast in a "tree" with the sprues running to the tangs. Casting tanged heads might have been easier than ones with sockets.
The only logical explanation of the barb is to prevent removal of the arrow from a wound as you suggest. This the first I have seen with the barb directly on one of the blades. There are many tables of arrow head shapes published in Russian archaeological journals. Maybe you could find a similar head there.
When Scythian arrow heads were cast the mold made two three-bladed arrow heads and one two-bladed arrow head. A little barb on the socket was not uncommon. The arrow heads were sprued from the pointed end. After casting the sprue was cut away and the tip was shaped. I have seen pictures of Chinese arrow heads cast in a "tree" with the sprues running to the tangs. Casting tanged heads might have been easier than ones with sockets.
The only logical explanation of the barb is to prevent removal of the arrow from a wound as you suggest. This the first I have seen with the barb directly on one of the blades. There are many tables of arrow head shapes published in Russian archaeological journals. Maybe you could find a similar head there.
Bede
-
Romain
- Posts: 251
- Joined: Sun Mar 13, 2005 1:28 am
- Location: Beijing
Bede,
You're right, greek arrowheads have their barb on the socket and not on the blade, as shows the photo below of a 5th century BC sample...
So what is my arrowhead ? Maybe a Scythian cast, copy or prototype.... (who copied who ?)
You're right, greek arrowheads have their barb on the socket and not on the blade, as shows the photo below of a 5th century BC sample...
So what is my arrowhead ? Maybe a Scythian cast, copy or prototype.... (who copied who ?)
You do not have the required permissions to view the files attached to this post.
-
Romain
- Posts: 251
- Joined: Sun Mar 13, 2005 1:28 am
- Location: Beijing
-
Romain
- Posts: 251
- Joined: Sun Mar 13, 2005 1:28 am
- Location: Beijing
- Stephen Selby
- Posts: 1452
- Joined: Thu Mar 10, 2005 1:10 pm
- Location: Hong Kong
- Contact:
I think that these long-necked arrowheads may have been Warring States crossbow bolts. The shaft might not have extended much below the end of the tang - just enough to create a nock. Unfletched and shot with a force of over 100#, they would have been quite effective for piercing leather armour.
Bamboo was used for arrow shafts in Central China in the WS period. I speculate that a bamboo shaft behind a solid bronze head would have either shattered or bent under a high force; so it may have been necessary to make a virtually solid bronze bolt with a wood or bone nock lying directly against the bronze tang.
Bamboo was used for arrow shafts in Central China in the WS period. I speculate that a bamboo shaft behind a solid bronze head would have either shattered or bent under a high force; so it may have been necessary to make a virtually solid bronze bolt with a wood or bone nock lying directly against the bronze tang.
