Brass or Horn Thumbring

This is where we discuss the bows, arrows, quivers and other hardware used in Asian archery.
Post Reply
Flight_Bow
Posts: 10
Joined: Sun Mar 25, 2007 7:35 am
Location: Austin, Texas

Brass or Horn Thumbring

Post by Flight_Bow » Mon Dec 03, 2007 12:14 am

Hi

I am looking at purchasing either a brass or horn thumbring--my question is which of these are best or better to use--and I know its a very subjective question, but your opinions might help me in deciding which to get. Also, I am looking at the Grozer scythian for my first horsebow (old scythian model) and was wondering how is the cast/stability compared to the newer model--SACYTHA-HUNGARIAN, and is there any noticeable hand shock in either model. Thanks
User avatar
Stephen Selby
Posts: 1452
Joined: Thu Mar 10, 2005 1:10 pm
Location: Hong Kong
Contact:

Post by Stephen Selby » Mon Dec 03, 2007 1:10 am

I recommend horn.
Flight_Bow
Posts: 10
Joined: Sun Mar 25, 2007 7:35 am
Location: Austin, Texas

Post by Flight_Bow » Mon Dec 03, 2007 1:25 am

ok, thanks. I am looking at the horn thumbrings from eastern-archery (http://www.eastern-archery.com/unitedstates.html) are these "good" ones or are there others that you prefer. Thanks
Flight_Bow
Posts: 10
Joined: Sun Mar 25, 2007 7:35 am
Location: Austin, Texas

Post by Flight_Bow » Mon Dec 03, 2007 1:26 am

I was also wondering whats the difference between the "horse-shoe" and the "tear-drop" versions? Thanks
User avatar
greg.krankurs
Posts: 29
Joined: Mon Jan 29, 2007 6:21 pm
Location: Michigan, USA

Post by greg.krankurs » Mon Dec 03, 2007 1:52 pm

the main difference is that shape of the ring.
Horse-shoe rings have a lip on them, makes it a little easier to keep the string in place. I can show u a picture in a few days when i get home.
User avatar
greg.krankurs
Posts: 29
Joined: Mon Jan 29, 2007 6:21 pm
Location: Michigan, USA

Post by greg.krankurs » Mon Dec 03, 2007 2:01 pm

Also. I got 4 rings from Reiner already (eastern-archery). So far the horse-shoe one I bought from him is my favorite ring, especially compared to 2 other ring-cutters. Do yourself a favor and just buy the basic design ring, without any inlays. that way you can get 2 rings, one horseshoe and one teardrop to try them both out. Make sure you get your size as close as you can. Even then you will probably have to sand it down to match your thumb (takes a few hours at most).
hope this helps
Cheers
Jason DuLac
Posts: 81
Joined: Mon Jul 02, 2007 9:42 pm
Location: MA USA

Post by Jason DuLac » Thu Dec 27, 2007 2:19 pm

I second the horn ring. Less weight for the string to push out of the way and easier to customize to your thumb shape/size once you get it.

J.
Post Reply